Download MindMIDI

Error message

Deprecated function: The each() function is deprecated. This message will be suppressed on further calls in menu_set_active_trail() (line 2385 of /home/mindmi6/public_html/includes/

Download MindMIDI

EEG Machine compatible with BioExplorer (I use a Pocket Neurobics Pendant EEG - The EEG Wireless Kit comes with BioExplorer software).
BioExplorer 1.5+
Reason 6.5+ (or other DAW with MIDI input)
MIDI Controller with lots of sliders/pots (25+) (Not required but easier to create musical arrangements)
Windows XP+ (I have used a Mac running Windows XP using Virtual Box

$1,160 EEG Machine with BioExplorer
$400 Reason 6.5
$300 MIDI Controller
$20 LoopBe30
$1,880 Total

1. Install LoopBe30
a. Ports after reboot - enter 4 (You might have to click the 'Change' button)
b. Click OK
c. Reboot computer
d. Open LoopBe30
e. Disable shortcut detection
f. Click 'Mute None' button
g. Click OK

2. Open 'MindMIDI Presets.reason' in Reason 6.5+
a. Under the 'Edit' menu, choose Preferences
b. Click the 'Advanced' tab
c. Set Bus A to '01 Internal MIDI'
Set Bus B to '02 Internal MIDI'
Set Bus C to '03 Internal MIDI'
Set Bus D to '04 InternalMIDI'
d. Setup MIDI Controller (If you do not see your device in the list choose )
e. Click OK
f. Map the sliders/pots to each slider on Reason's Mixer (I used an Akai APC40, so if that is what you are using then it should already be mapped)
g. If you do not have a MIDI controller, you can use Reason's Mixer
h. Verify that all volume levels on MIDI controller are turned all the way down (except master volume level)

3. Open 'MindMIDI.bxd' in BioExplorer
a. Under the 'Window' menu, choose Signal Diagram
b. Change MIDI 1 - 8 settings (Device needs to be 01. Internal MIDI)
Change MIDI 9 - 16 settings (Device needs to be 02. Internal MIDI)
Change MIDI 17 - 24 settings (Device needs to be 03. Internal MIDI)
(Nothing is routed through the Internal MIDI port 4 - More instruments may be added)
c. If you want to record brainwaves (uses more CPU and Memory):
1. Under the 'Session' menu, choose 'Capture'
2. Press record button
3. Enter filename
4. Click OK
5. Enter name
6. Click OK
7. Press play
d. If you do not want to record brainwaves (uses less CPU and Memory):
1. Under the 'Session' menu, choose 'Capture'
2. Press play

4. Creating music
a. Turn up the volume of at least one instrument per range (One or more instruments from MIDI 1-8, one or more instruments from MIDI 9-16, and one or more from MIDI 17-24).
b. If you want different musical instruments, change them in Reason, but you will have to tweak the settings in the corresponding MIDI object in MindMIDI's Signal Diagram.

5. Recording music
a. Audio Record Wizard is inexpensive and works well (
b. You can also save your reason arrangement and replay your recorded brainwaves.

Check to make sure that you have a steady green on CH1 and CH2. If it is flashing red, check your electrode placements for good direct-skin contact. Do not use in an area with a lot of electrical interference. Double check that LoopBe30's shortcut detection is disabled.

If the music is skipping beats or somehow off beat:
-Check your electrode connections.
-Try a different data transfer rate with your EEG (fixed a problem I had).
-Shut down other programs.
-Restart recording in BioExplorer.
-Check LoopBe30 and make sure that shortcut detection is disabled.
-Restart computer.
-Possibly caused by background computer tasks like virus protection or computer maintenance.

Please help support MindMIDI

If you like MindMIDI, let me know. I would love to see videos of you using MindMIDI, or listen to your music. Send me an email: